Enabling Bfd Globally; Optional) Setting The Multicast Ip Address Of Bfd - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
No.
1
2
3

6.3.2 Enabling BFD Globally

Context
Do as follows on S3700s at both ends of the link to be detected.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bfd
BFD is enabled globally and the BFD view is displayed.
By default, BFD is disabled globally. Before configuring the BFD functions, you must enable
BFD globally; otherwise, the configuration fails.
----End

6.3.3 (Optional) Setting the Multicast IP Address of BFD

Context
Do as follows on S3700s at both ends of the link to be detected.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bfd
The BFD view is displayed.
Step 3 Run:
default-ip-address ip-address
Issue 01 (2011-10-26)
Data
BFD configuration name
Peer IP address, local interface type and number for the directly-connected link
detected by BFD, and default multicast address used by BFD if it checks the physical
layer status of the link
BFD session parameters: local and remote discriminators
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 BFD Configuration
286