Configuring Two-Way Dmm Packet Receiving - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Context
Do as follows on the devices configured with MEPs on two ends of the link:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cfm md md-name
The MD view is displayed.
Step 3 Run:
ma ma-name
The MA view is displayed.
Step 4 Run:
delay-measure two-way threshold threshold-value
An alarm threshold is set for the two-way frame delay measurement.
----End

5.4.4 Configuring Two-Way DMM Packet Receiving

Two-way frame delay measurement can work properly only when the devices at both ends are
enabled to receive DMM packets.
Context
The following operations must performed on both the local and remote MEP devices.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cfm md md-name
The MD view is displayed.
Step 3 Run:
ma ma-name
The MA view is displayed.
Step 4 Run:
delay-measure two-way receive
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 ITU-T Recommendation Y.1731 Configuration
270