Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
When you set the discriminators, ensure that the local discriminator at the local end is the same
as the remote discriminator at the peer end; otherwise, the BFD session fails to be set up. After
local and remote discriminators are set successfully, they cannot be modified.
Step 4 Run:
commit
The configuration is committed.
----End

6.3.5 Checking the Configuration

Procedure
l
l
l
l
----End
Example
Run the display bfd configuration command, and you can view the configuration of a BFD
session.
<Quidway> display bfd configuration static name bfd1 verbose
--------------------------------------------------------------------------------
BFD Session Configuration Name : bfd1
--------------------------------------------------------------------------------
Local Discriminator
BFD Bind Type
Bind Session Type
Bind Peer IP Address
Bind Interface
TOS-EXP
Min Tx Interval (ms)
Proc Interface Status
Bind Application
Issue 01 (2011-10-26)
The remote discriminator is set.
NOTE
For the BFD sessions that use the default multicast IP address, the local and remote discriminators must
be different.
NOTE
After setting necessary parameters, for example, local and remote discriminators, during the creation of a
single-hop BFD session, you must run the commit command to make the configuration take effect.
Run the display bfd configuration { all | static [ for-ip | name cfg-name ] |
discriminator local-discr-value | dynamic | peer-ip peer-ip [ vpn-instance vpn-name ] |
static-auto } [ verbose ] command to check the configuration of BFD.
Run the display bfd interface [ interface-type interface-number ] command to check
information about the interface where BFD is enabled.
Run the display bfd session { { all |static } [ for-ip ] | discriminator discr-value |
dynamic | peer-ip peer-ip [ vpn-instance vpn-name ] | static-auto } [ verbose ] command
to check information about a BFD session.
Run the display bfd statistics session { { all | static } [ for-ip ] | discriminator discr-
value | dynamic | peer-ip peer-ip [ vpn-instance vpn-name ] | static-auto } command to
check the statistics on a BFD session.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 20 Remote Discriminator
: Interface(Ethernet0/0/1)
: Static
: 224.0.0.184
: Ethernet0/0/1
: 7 Local Detect Multi
: 1000 Min Rx Interval (ms)
: Disable WTR Interval (ms)
: No Application Bind
6 BFD Configuration
: 10
: 3
: 1000
: -
288