Huawei Quidway S3700 Series Configuration Manual page 54
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Figure 2-6 Networking of Smart Link application
Monitor Link group
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Issue 01 (2011-10-26)
Smart Link group
Eth0/0/1
SwitchA
Eth0/0/1
Smart Link group
User1
Configure Smart Link groups on Switch A and Switch C, and add uplink interfaces to the
groups.
Configure Monitor Link groups on Switch A and Switch B.
Enable Switch A and Switch C to send Flush packets.
Enable Switch A and Switch C to receive Flush packets.
Numbers of interfaces on Switch A, Switch B, and Switch C
IDs of the Smart Link groups
Control VLAN ID and password contained in Flush packets
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Smart Link and Monitor Link Configuration
IP/MPLS
core
network
Eth0/0/1
Eth0/0/2
Eth0/0/3
SwitchB
Eth0/0/3
Eth0/0/2
SwitchC
User2
Monitor Link group
Active link
Inactive link
42
Advertisement
Table of Contents
