Huawei Quidway S3700 Series Configuration Manual page 147

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[UPED-mst-region] active region-configuration
[UPED-mst-region] quit
l Configure UPE E.
# Create data VLANs 100 to 300 on UPE E.
<Quidway> system-view
[Quidway] sysname UPEE
[UPEE] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 20 and VLAN 21 and data VLANs 100
to 300 in domain 3.
[UPEE] stp region-configuration
[UPEE-mst-region] instance 1 vlan 20 21 100 to 300
# Activate the configuration.
[UPEE-mst-region]
[UPEE-mst-region] quit
l Configure UPE F.
# Create data VLANs 100 to 300 on UPE F.
<Quidway> system-view
[Quidway] sysname UPEF
[UPEF] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 20 and VLAN 21 and data VLANs 100
to 300 in domain 3.
[UPEF] stp region-configuration
[UPEF-mst-region] instance 1 vlan 20 21 100 to 300
# Activate the configuration.
[UPEF-mst-region] active region-configuration
[UPEF-mst-region] quit
l Configure UPE G.
# Create data VLANs 100 to 300 on UPE G.
<Quidway> system-view
[Quidway] sysname UPEG
[UPEG] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 20 and VLAN 21 and data VLANs 100
to 300 in domain 3.
[UPEG] stp region-configuration
[UPEG-mst-region] instance 1 vlan 20 21 100 to 300
# Activate the configuration.
[UPEG-mst-region] active region-configuration
[UPEG-mst-region] quit
l Verify the configuration.
Run the display stp region-configuration command on the devices to view the mapping
between instances and VLANs. The displayed information on UPE A is as follows:
[UPEA] display stp region-configuration
Oper configuration
Issue 01 (2011-10-26)
active region-configuration
Format selector :0
Region name :00e0cd568d00
Revision level :0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
135