Binding An Ma To A Vlan; Optional) Setting An Alarm Threshold For The Two-Way Frame Delay Measurement; Huawei Proprietary And Confidential - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability

5.4.2 Binding an MA to a VLAN

Binding an MA to a VLAN is a prerequisite for configuring the one-way frame delay
measurement in the VLAN.
Context
Do as follows on the devices configured with MEPs:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cfm version { draft7 | standard }
The 802.1ag version is set to IEEE Standard 802.1ag-2007.
After the version is changed, all CFM configurations are deleted; therefore, use the cfm version
command with caution.
Step 3 Run:
cfm md md-name
The MD view is displayed.
Step 4 Run:
ma ma-name
The MA view is displayed.
Step 5 Run:
map vlan vlan-id
The MA is bound to a VLAN.
----End
5.4.3 (Optional) Setting an Alarm Threshold for the Two-way Frame
Delay Measurement
You can set an alarm threshold for the two-way frame delay measurement in each MA. When
the two-way delay exceeds the alarm threshold, an alarm is generated.
Issue 01 (2011-10-26)
NOTE
IEEE 802.1ag has two versions: IEEE 802.1ag Draft 7 and IEEE Standard 802.1ag-2007. Y.1731 can be
used only on the device complying with IEEE Standard 802.1ag-2007. Therefore, run the cfm version
command to set the 802.1ag version to IEEE Standard 802.1ag-2007 before configuring Y.1731.
CAUTION

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.
5 ITU-T Recommendation Y.1731 Configuration
269