Adding The Description Of A Bfd Session - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bfd configuration-name
The BFD session view is displayed.
Step 3 Run:
min-tx-interval interval
The expected interval for sending BFD packets is set.
By default, the interval for sending BFD control packets is 1000 ms.
Step 4 Run:
min-rx-interval interval
The minimum interval for receiving BFD packets is set.
By default, the interval for receiving BFD control packets is 1000 ms.
Step 5 Run:
detect-multiplier multiplier
The local detection time multiplier is set.
By default, the local detection multiplier is 3.
Step 6 Run:
commit
The configuration takes effect.
----End

6.6.3 Adding the Description of a BFD Session

Descriptions of BFD sessions help you distinguish between various BFD sessions.
Context
Do as follows on the switch:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2011-10-26)
NOTE
The description command takes effect only on statically configured BFD sessions not on BFD sessions
that are dynamically configured or BFD sessions that are created by using automatically-negotiated
discriminators.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 BFD Configuration
297