Configuring The Timeout Time Of Sending Gratuitous Arp Packets By The Master Router - Huawei Quidway S3700 Series Configuration Manual
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Procedure
l
l
----End
7.7.6 Configuring the Timeout Time of Sending Gratuitous ARP
Packets by the Master router
By adjusting the interval for sending gratuitous ARP packets on the master device, you can
reduce the number of VRRP packets on the network.
Context
Do as follows on the switch to send gratuitous ARP packets:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2011-10-26)
For VRRP for IPv4,
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
vrrp un-check ttl
Checking TTLs in VRRP packets is disabled.
By default, TTLs in VRRP packets are detected. You can run the undo vrrp un-check
ttl command to enable the router to check TTLs in VRRP packets.
For VRRP6,
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
vrrp6 un-check hop-limit
Checking the hop limit in VRRP6 packets is disabled.
By default, the hop limit in VRRP6 packets is checked. You can run the undo vrrp6
un-check hop-limit command to enable the switch to check the hop limit in VRRP6
packets.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VRRP and VRRP6 Configuration
339
Advertisement
Table of Contents
