Huawei Quidway S3700 Series Configuration Manual page 119

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
The primary port is Eth 0/0/1, and the secondary port is Eth 0/0/2.
# View detailed information about PE-AGG in domain 2.
[PE-AGG] display rrpp verbose domain 2
Domain Index
Control VLAN
Protected VLAN: Reference Instance 2
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port: Ethernet0/0/1
The preceding information shows that VLAN 10 is the control VLAN in domain 2, and VLANs
mapping instance 2 are the protected VLANs.
PE-AGG is the master node in domain 2 and is in Complete state.
The primary port is Eth 0/0/2, and the secondary port is Eth 0/0/1.
----End
Configuration Files
l
#
sysname UPEA
#
vlan batch 5 to 6 10 to 11 100 to 300
#
rrpp enable
#
stp region-configuration
instance 1 vlan 5 to 6 100 to 200
instance 2 vlan 10 to 11 201 to 300
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode transit primary-port Ethernet 0/0/1 secondary-port Ethernet 0/0/2
level 0
ring 1 enable
rrpp domain 2
control-vlan 10
protected-vlan reference-instance 2
ring 1 node-mode transit primary-port Ethernet 0/0/1 secondary-port Ethernet 0/0/2
level 0
ring 1 enable
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
return
Issue 01 (2011-10-26)
: 2
: major 10
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: Ethernet0/0/2
Configuration file of UPE A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 11
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: BLOCKED
3 RRPP Configuration
107