Huawei Quidway S3700 Series Configuration Manual page 89

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
# Enable RRPP on SwitchC.
[SwitchC] rrpp enable
Step 6 Verify the configuration.
After the configurations are complete and network become stable, run the following commands
to verify the configuration. Take Switch A for example.
l Run the display rrpp brief command on SwitchA. The following information is displayed:
l Run the display rrpp verbose domain command on SwitchA. Detailed information about
----End
Configuration Files
l
Issue 01 (2011-10-26)
[SwitchA] display rrpp brief
Abbreviations for Switch Node Mode :
M - Master , T - Transit , E - Edge , A - Assistant-Edge
RRPP Protocol Status:
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 0 sec (0 sec default).
Number of RRPP Domains: 1
Domain Index : 1
Control VLAN : major 20
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
Ring Ring Node
ID Level Mode
Enabled
---------------------------------------------------------------------------
1 0 M
You can find that RRPP is enabled on SwitchA. The main control VLAN of domain 1 is
VLAN 20 and the sub control VLAN is VLAN 21. SwitchA is the master node of ring 1.
Eth 0/0/1 is the primary interface, and Eth 0/0/2 is the secondary interface.
RRPP domain 1 is displayed as follows:
[SwitchA] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 20
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Master
Ring State : Complete
Is Enabled : Enable
Primary port : Ethernet0/0/1
Secondary port: Ethernet0/0/2
Configuration file of Switch A
sysname SwitchA
#
vlan batch 20 to 21 100 to 300
#
rrpp enable
#
stp region-
configuration
instance 1 vlan 20 to 21 100 to
300
active region-
configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Enable
sub 21
Fail Timer : 6 sec(default is 6 sec)
Primary/Common
Port
Ethernet0/0/1
sub 21
Fail Timer : 6 sec(default is 6 sec)
Port status: UP
Port status: BLOCKED
3 RRPP Configuration
Secondary/Edge
Port
Ethernet0/0/2
Is Active : Yes
Is
Yes
77