Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
system-view
The system view is displayed.
Step 2 Run:
rrpp domain domain-id
The domain view is displayed.
Step 3 Run:
ring ring-id enable
The RRPP ring is enabled.
----End
3.4.9 Enabling the RRPP Protocol
To activate an RRPP ring, you must enable RRPP and the RRPP ring.
Context
Do as follows on all switches in the RRPP domain:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rrpp enable
The RRPP protocol is enabled.
----End
3.4.10 (Optional) Creating a RRPP Ring Group
To reduce the Edge-Hello packets to be sent and received, you can add a group of sub-rings with
the same edge nodes or assistant edge nodes to an RRPP ring group.
Context
Do as follows on the edge node or assistant edge node:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2011-10-26)
NOTE
The RRPP ring can be activated only when both the RRPP ring and RRPP protocol are enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
69