Huawei Quidway S3700 Series Configuration Manual page 129

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure UPE D.
l Configure PE-AGG.
Step 3 Create RRPP domains and configure the protected VLANs and control VLANs.
l Configure CE1.
l Configure CE2.
Issue 01 (2011-10-26)
[UPEC-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/2] stp disable
[UPEC-Ethernet0/0/2] quit
[UPEC] interface ethernet 0/0/3
[UPEC-Ethernet0/0/3] port link-type trunk
[UPEC-Ethernet0/0/3] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/3] stp disable
[UPEC-Ethernet0/0/3] quit
[UPEC] interface ethernet 0/0/4
[UPEC-Ethernet0/0/4] port link-type trunk
[UPEC-Ethernet0/0/4] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/4] stp disable
[UPEC-Ethernet0/0/4] quit
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE D. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPED] interface ethernet 0/0/1
[UPED-Ethernet0/0/1] port link-type trunk
[UPED-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPED-Ethernet0/0/1] stp disable
[UPED-Ethernet0/0/1] quit
[UPED] interface ethernet 0/0/2
[UPED-Ethernet0/0/2] port link-type trunk
[UPED-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPED-Ethernet0/0/2] stp disable
[UPED-Ethernet0/0/2] quit
# Disable STP of the interfaces that need to be added to the RRPP ring on PE-AGG. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[PE-AGG] interface ethernet 0/0/1
[PE-AGG-Ethernet0/0/1] port link-type trunk
[PE-AGG-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[PE-AGG-Ethernet0/0/1] stp disable
[PE-AGG-Ethernet0/0/1] quit
[PE-AGG] interface ethernet 0/0/2
[PE-AGG-Ethernet0/0/2] port link-type trunk
[PE-AGG-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[PE-AGG-Ethernet0/0/2] stp disable
[PE-AGG-Ethernet0/0/2] quit
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[CE1] rrpp domain 1
[CE1-rrpp-domain-region1] protected-vlan reference-instance 1
[CE1-rrpp-domain-region1] control-vlan 5
[CE1-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[CE1] rrpp domain 2
[CE1-rrpp-domain-region2] protected-vlan reference-instance 2
[CE1-rrpp-domain-region2] control-vlan 10
[CE1-rrpp-domain-region2] quit
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[CE2] rrpp domain 1
[CE2-rrpp-domain-region1] protected-vlan reference-instance 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
117