Example For Configuring Vrrp Fast Switchover - Huawei Quidway S3700 Series Configuration Manual
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
7.11.3 Example for Configuring VRRP Fast Switchover
Networking Requirements
As shown in
Gateway (UMG) form a simple next generation network (NGN).
The networking is as follows:
l
l
When Switch A fails, or when the link between Switch A and Switch B fails, the active/standby
switchover should be completed within 1 second. That is, fast switchover is required on the
bearer network.
Figure 7-5 Networking of VRRP fast switchover
SwitchA
Ethernet0/0/1
SwitchC
Device
Switch A
Switch B
Issue 01 (2011-10-26)
#
return
Figure
7-5, Switch A, Switch B, Switch C, Switch D and the Universal Medium
The UMG connects to Switch A and Switch B through Switch C and Switch D.
Switch A and Switch B run VRRP. Switch A functions as the master, and Switch B
functions as the backup.
Ethernet0/0/2
Virtual IP address: 10.1.1.3/24
Interface
Eth 0/0/1
Eth 0/0/2
Eth 0/0/1
Eth 0/0/2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Backbone
Network
Ethernet0/0/2
Backup group 10
VLAN
UMG
VLANIF interface
VLANIF100
VLANIF200
VLANIF100
VLANIF200
7 VRRP and VRRP6 Configuration
SwitchB
Ethernet0/0/1
SwitchD
IP address
10.1.1.1/24
192.168.0.1/24
10.1.1.2/24
192.168.0.2/24
359
Advertisement
Table of Contents
