Example For Associating Ethernet Cfm With Rrpp - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l

4.18.9 Example for Associating Ethernet CFM with RRPP

Networking Requirements
As shown in
VLANs 100 to 300 are configured on the CE; packets are transmitted on ring 1 of domain 1.
Ethernet CFM is configured between UPEA and PE-AGG, and Ethernet CFM is associated with
primary and secondary interfaces on the RRPP ring.
Issue 01 (2011-10-26)
cfm md md1
ma ma1
map vlan 10
mep mep-id 2 interface Ethernet0/0/1 outward
mep ccm-send mep-id 2 enable
remote-mep mep-id 1
remote-mep ccm-receive mep-id 1 enable
ma ma2
map vlan 20
mep mep-id 1 interface Ethernet0/0/2 outward
mep ccm-send mep-id 1 enable
remote-mep mep-id 2
remote-mep ccm-receive mep-id 2 enable
#
oam-mgr
oam-bind ingress cfm md md1 ma ma1 egress cfm md md1 ma ma2
oam-bind ingress cfm md md1 ma ma2 egress cfm md md1 ma ma1
#
return
Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 20
#
cfm enable
#
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 20
#
cfm md md1
ma ma2
map vlan 20
mep mep-id 2 interface Ethernet0/0/2 outward
mep ccm-send mep-id 2 enable
remote-mep mep-id 1
remote-mep ccm-receive mep-id 1 enable
#
return
Figure 4-20, UPEA, UPEB, UPEC, and PE-AGG constitute an RRPP single ring.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
247