Huawei Quidway S3700 Series Configuration Manual page 154

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Run the display rrpp brief command on UPE D. The following information is displayed:
[UPED] display rrpp brief
Abbreviations for Switch Node Mode :
M - Master , T - Transit , E - Edge , A - Assistant-Edge
RRPP Protocol Status: Enable
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 0 sec (0 sec default).
Number of RRPP Domains: 3
Domain Index
Control VLAN
Protected VLAN : Reference Instance 1
Hello Timer
Ring
ID
----------------------------------------------------------------------------
1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 2
Hello Timer
Ring
ID
----------------------------------------------------------------------------
1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 1 to 3
Hello Timer
Ring
ID
----------------------------------------------------------------------------
1
The preceding information shows that the RRPP protocol is enabled on UPE D.
In domain 1:
VLAN 1 is the control VLAN and VLANs mapping instance 1 are the protected VLANs.
UPE D is the master on ring 1; Eth 0/0/1 is the primary port; Eth 0/0/2 is the secondary port.
In domain 2:
VLAN 10 is the control VLAN and VLANs mapping instance 2 are the protected VLANs.
UPE D is the master node on ring 1. The primary port is Eth 0/0/2, and the secondary port is
Eth 0/0/1.
In domain 3:
VLAN 20 is the control VLAN and VLANs mapping instance 1 to 3 are the protected VLANs.
UPE D is a transit node on ring 1. The primary port is Eth 0/0/3, and the secondary port is Eth
0/0/4.
l Run the display rrpp verbose domain command on UPE D. You can obtain the following
# View detailed information about UPE D in domain 1.
[UPED] display rrpp verbose domain 1
Domain Index
Issue 01 (2011-10-26)
: 1
: major 5
: 1 sec(default is 1 sec)
Ring Node Primary/Common
Level Mode Port
0 M Ethernet0/0/1
: 2
: major 10
: 1 sec(default is 1 sec)
Ring Node Primary
Level Mode Port
0 M Ethernet0/0/2
: 3
: major 20
: 1 sec(default is 1 sec)
Ring Node Primary/Common
Level Mode Port
0 T Ethernet0/0/3
results:
: 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 6
Fail Timer : 6 sec(default is 6 sec)
Secondary/Edge
Port
Ethernet0/0/2
sub 11
Fail Timer : 6 sec(default is 6 sec)
Secondary/Edge
Port
Ethernet0/0/1
sub 21
Fail Timer : 6 sec(default is 6 sec)
Secondary/Edge
Port
Ethernet0/0/4
3 RRPP Configuration
Is
Enabled
Yes
Is
Enabled
Yes
Is
Enabled
Yes
142