Creating Instances - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
HSI: indicates High Speed Internet
In the preceding figure, the IPTV service and HSI service are respectively carried in two domains
that share the same RRPP ring. By applying RRPP multi-instance, you can realize balanced
traffic loads for both services, that is, the IPTV service is carried in domain 1, and the HSI service
is carried in domain 2.
Pre-configuration Tasks
Before configuring RRPP multi-instance, complete the following tasks:
l
l
Data Preparation
To configure RRPP multi-instance, you need the following data.
No.
1
2
3
4
5
6
7
8

3.4.2 Creating Instances

Context
Do as follows on the S3700 that you want to add to an RRPP domain with multiple instances.
Issue 01 (2011-10-26)
NOTE
Only either RRPP or STP can be configured on one port.
RRPP has no auto-selection mechanism. Ring detection and protection can be enabled in the corresponding
protocol only when each node in the ring is correctly configured. Therefore, make sure that all the
configurations are correct.
Establishing the ring networking
Configuring link attributes for interfaces
Data
IDs of RRPP domains
IDs of control VLANs in RRPP domains
IDs of protected VLANs in RRPP domains
IDs of RRPP rings in RRPP domains
Names of the ports in RRPP rings
(Optional) IDs of the ring groups
(Optional) Delay for link restoration
(Optional) Values of the Hello timer and Fail timer in RRPP domains
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
63