Optional) Setting An Alarm Threshold For The One-Way Frame Delay Measurement; Configuring Dm Frame Reception On A Remote Mep - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
The MD view is displayed.
Step 4 Run:
ma ma-name
The MA view is displayed.
Step 5 Run:
map vlan vlan-id
The MA is bound to a VLAN.
----End
5.3.3 (Optional) Setting an Alarm Threshold for the One-way Frame
Delay Measurement
Context
Do as follows on the devices configured with MEPs:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cfm md md-name
The MD view is displayed.
Step 3 Run:
ma ma-name
The MA view is displayed.
Step 4 Run:
delay-measure one-way threshold threshold-value
An alarm threshold is set for the two-way frame delay measurement.
----End

5.3.4 Configuring DM Frame Reception on a Remote MEP

The One-way frame delay measurement can work normally only when DM frame reception is
configured on a remote MEP.
Context
Do as follows on a remote MEP:
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 ITU-T Recommendation Y.1731 Configuration
265