Huawei Quidway S3700 Series Configuration Manual page 240
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[SwitchA] cfm enable
[SwitchA] cfm md md1 level 6
[SwitchA-md-md1] quit
# Create MD 1 on Switch D, Switch E, and Switch F.
The configurations on Switch D, Switch E, and Switch F are similar to the configuration on
Switch A, and are not mentioned here.
Step 4 Create MD 2.
# Create MD 2 on Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] cfm enable
[SwitchB] cfm md md2 level 4
[SwitchB-md-md2] quit
# Create MD 2 on Switch C.
The configuration on Switch C is similar to the configuration on Switch B, and is not mentioned
here.
Step 5 Create the default MD and associate the default MD with VLAN 2 and VLAN 3 on Switch B
and Switch C.
# Create the default MD and associate the default MD to VLAN 2 and VLAN 3 on SwitchB.
[SwitchB] cfm default md level 6
[SwitchB-default-md] vlan 2 to 3
[SwitchB-default-md] quit
# Create the default MD and associate the default MD to VLAN 2 and VLAN 3 on Switch C.
The configuration on Switch C is similar to the configuration on Switch B, and is not mentioned
here.
Step 6 Set the MIP creation rule in the default MD on Switch B and Switch C.
# Set the MIP creation rule in the default MD on Switch B.
[SwitchB] cfm default md
[SwitchB-default-md] mip create-type default
[SwitchB-default-md] quit
# Set the MIP creation rule in the default MD on Switch C.
The configuration on Switch C is similar to the configuration on Switch B, and is not mentioned
here.
Step 7 Create and configure MA 1 in MD 1 on all the devices except for Switch B and Switch C.
# Create MA 1 in MD 1 on Switch A.
[SwitchA] cfm md md1
[SwitchA-md-md1] ma ma1
[SwitchA-md-md1-ma-ma1] map vlan 2
[SwitchA-md-md1-ma-ma1] quit
# Create MA 1 in MD 1 on Switch D and Switch F.
The configurations on Switch D and Switch F are similar to the configuration on Switch A, and
are not mentioned here.
Step 8 Create and configure MA 2 in MD 1 on all the devices except for Switch B and Switch C.
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
228
Advertisement
Table of Contents
