Huawei Quidway S3700 Series Configuration Manual page 365

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l When Switch A recovers, it preempts to be the master.
Run the undo shutdown command on VLANIF 100 of Switch A. Wait for 20 seconds after
VLANIF 100 recovers to the Up state, and then run the display vrrp command on Switch A to
view the VRRP status. You can find that Switch A is the master switch.
----End
Configuration Files
l
l
Issue 01 (2011-10-26)
Config type : normal-vrrp
Config track link-bfd down-number : 0
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 100 200
#
interface Vlanif100
ip address 10.1.1.1 255.255.255.0
vrrp vrid 1 virtual-ip 10.1.1.111
vrrp vrid 1 priority 120
vrrp vrid 1 preempt-mode timer delay 20
#
interface Vlanif200
ip address 192.168.1.1 255.255.255.0
#
interface Ethernet0/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface Ethernet0/0/2
port hybrid pvid vlan 200
port hybrid untagged vlan 200
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 10.1.1.0 0.0.0.255
#
return
Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 100 400
#
interface Vlanif100
ip address 10.1.1.2 255.255.255.0
vrrp vrid 1 virtual-ip 10.1.1.111
#
interface Vlanif400
ip address 192.168.2.1 255.255.255.0
#
interface Ethernet0/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface Ethernet0/0/2
port hybrid pvid vlan 400
port hybrid untagged vlan 400
#
ospf 1
area 0.0.0.0
network 192.168.2.0 0.0.0.255
network 10.1.1.0 0.0.0.255
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VRRP and VRRP6 Configuration
353