Huawei Quidway S3700 Series Configuration Manual page 84

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Example
Run the display stp region-configuration command, and you can view the mapping between
MSTIs and VLANs. The following is an example:
<Quidway> display stp region-configuration
Oper configuration
Run the display rrpp brief command, and you can view information such as the node mode,
RRPP status, control VLAN, protected VLAN, and values of timers. The following is an
example:
<Quidway> display rrpp brief
Abbreviations for Switch Node Mode :
M - Master , T - Transit , E - Edge , A - Assistant-Edge
RRPP Protocol Status: Disable
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 1 sec (0 sec default).
Number of RRPP Domains: 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 10
Hello Timer
Ring
ID
-------------------------------------------------------------------------------
1
Run the display rrpp verbose command, and you can view detailed information such as the
control VLAN, protected VLAN, timers, node mode, and port status. The following is an
example:
<Quidway> display rrpp verbose domain 1 ring 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 30
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port : GigabitEthernet0/0/2
Run the display rrpp statistics command, and you can view the statistics of sent and received
packets. The following is an example:
<Quidway> display rrpp statistics domain 1 ring 1
RRPP Ring
Ring Level
Node Mode
Is Active
Primary port
Packet
Direct
Issue 01 (2011-10-26)
Format selector :0
Region name :00e0cd568d00
Revision level :0
Instance Vlans Mapped
0 3 to 99, 301 to 4094
1 1, 100 to 200
2 2, 201 to 300
: 1
: major 30
: 1 sec(default is 1 sec)
Ring Node
Level Mode
0 M
: 1
: major 400
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: GigabitEthernet0/0/1
: 1
: 0
: Master
: Yes
: GigabitEthernet0/0/1
LINK
HEALTH DOWN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 31
Fail Timer : 6 sec(default is 6 sec)
Primary/Common
Port
GigabitEthernet0/0/1
sub 401
Fail Timer : 6 sec(default is 6 sec)
COMMON COMPLETE
FDB FDB
3 RRPP Configuration
Secondary/Edge
Port
GigabitEthernet0/0/2
Is Active : Yes
Port status: UP
Port status: BLOCKED
EDGE MAJOR
HELLO FAULT
Is
Enabled
No
Packet
Total
72