Huawei Quidway S3700 Series Configuration Manual page 131
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure PE-AGG.
Step 4 Create an RRPP ring.
l Configure PE-AGG.
l Configure UPE A.
l Configure UPE D.
Issue 01 (2011-10-26)
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[UPED] rrpp domain 2
[UPED-rrpp-domain-region2] protected-vlan reference-instance 2
[UPED-rrpp-domain-region2] control-vlan 10
[UPED-rrpp-domain-region2] quit
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[PE-AGG] rrpp domain 1
[PE-AGG-rrpp-domain-region1] protected-vlan reference-instance 1
[PE-AGG-rrpp-domain-region1] control-vlan 5
[PE-AGG-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[PE-AGG] rrpp domain 2
[PE-AGG-rrpp-domain-region2] protected-vlan reference-instance 2
[PE-AGG-rrpp-domain-region2] control-vlan 10
[PE-AGG-rrpp-domain-region2] quit
# Configure PE-AGG as the master node of ring 1 in domain 1. Configure Eth 0/0/1 as the
primary port and Eth 0/0/2 as the secondary port.
[PE-AGG] rrpp domain 1
[PE-AGG-rrpp-domain-region1] ring 1 node-mode master primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[PE-AGG-rrpp-domain-region1] ring 1 enable
[PE-AGG-rrpp-domain-region1] quit
# Configure PE-AGG as the master node of ring 1 in domain 2. Configure Eth 0/0/2 as the
primary port and Eth 0/0/1 as the secondary port.
[PE-AGG] rrpp domain 2
[PE-AGG-rrpp-domain-region2] ring 1 node-mode master primary-port ethernet 0/0/2
secondary-port ethernet 0/0/1 level 0
[PE-AGG-rrpp-domain-region2] ring 1 enable
[PE-AGG-rrpp-domain-region2] quit
# Configure UPE A as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE A.
[UPEA] rrpp domain 1
[UPEA-rrpp-domain-region1] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEA-rrpp-domain-region1] ring 1 enable
[UPEA-rrpp-domain-region1] quit
# Configure UPE A as a transit node of ring 1 in domain 2 and specify primary and secondary
ports on UPE A.
[UPEA] rrpp domain 2
[UPEA-rrpp-domain-region2] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEA-rrpp-domain-region2] ring 1 enable
[UPEA-rrpp-domain-region2] quit
# Configure UPE D as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE D.
[UPED] rrpp domain 1
[UPED-rrpp-domain-region1] ring 1 node-mode transit primary-port ethernet 0/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
119
Advertisement
Table of Contents
