Huawei Quidway S3700 Series Configuration Manual page 137

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Issue 01 (2011-10-26)
# View detailed information about UPE B in domain 1.
[UPEB] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 5
Protected VLAN: Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : LinkUp
Is Enabled : Enable
Primary port : Ethernet0/0/1
Secondary port: Ethernet0/0/2
RRPP Ring : 2
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Is Enabled : Enable
Common port : Ethernet0/0/1
Edge port : Ethernet0/0/3
RRPP Ring : 3
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Is Enabled : Enable
Common port : Ethernet0/0/1
Edge port : Ethernet0/0/4
The preceding information shows that VLAN 5 is the control VLAN in domain 1, and VLANs
mapping instance 1 are the protected VLANs.
UPE B is a transit node on ring 1 in domain 1 and is in LinkUp state.
UPE B is a transit node on ring 2 in domain 1 and is in LinkUp state. Eth 0/0/1 is the public
port, and Eth 0/0/3 is the edge port.
UPE B is a transit node on ring 3 in domain 1 and is in LinkUp state. Eth 0/0/1 is the public
port, and Eth 0/0/4 is the edge port.
# View detailed information about UPE B in domain 2.
[UPEB] display rrpp verbose domain 2
Domain Index : 2
Control VLAN : major 10
Protected VLAN: Reference Instance 2
Hello Timer : 1 sec(default is 1 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : LinkUp
Is Enabled : Enable
Primary port : Ethernet0/0/1
Secondary port: Ethernet0/0/2
RRPP Ring : 2
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Is Enabled : Enable
Common port : Ethernet0/0/1
Edge port : Ethernet0/0/3
RRPP Ring : 3
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 6
Fail Timer : 6 sec(default is 6 sec)
Port status: UP
Port status: UP
Port status: UP
Port status: UP
Port status: UP
Port status: UP
sub 11
Fail Timer : 6 sec(default is 6 sec)
Port status: UP
Port status: UP
Port status: UP
Port status: UP
3 RRPP Configuration
Is Active : Yes
Is Active : Yes
Is Active : Yes
Is Active : Yes
Is Active : Yes
125