Example For Configuring Crossed Rrpp Rings With Multiple Instances (Hw Version) - Huawei Quidway S3700 Series Configuration Manual
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
return
l
#
sysname PE-AGG
#
vlan batch 5 to 6 10 to 11 100 to 300
#
rrpp enable
#
stp region-configuration
instance 1 vlan 5 to 6 100 to 200
instance 2 vlan 10 to 11 201 to 300
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode master primary-port Ethernet 0/0/1 secondary-port Ethernet 0/0/2
level 0
ring 1 enable
rrpp domain 2
control-vlan 10
protected-vlan reference-instance 2
ring 1 node-mode master primary-port Ethernet 0/0/2 secondary-portEthernet 0/0/1
level 0
ring 1 enable
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
return
3.6.5 Example for Configuring Crossed RRPP Rings with Multiple
Instances (HW version)
Networking Requirements
As shown in
major rings: ring 1 in domain 1 and ring 1 in domain 2.
CE1, UPE B, and UPE C form two subrings: ring 2 in domain 1 and ring 2 in domain 2. CE1 is
connected to the major rings through Eth 0/0/3 of UPE B and Eth 0/0/3 of UPE C. UPE B is an
edge node, and UPE is an assistant edge node.
CE2, UPE B, and UPE C form two subrings: ring 3 in domain 1 and ring 3 in domain 2. CE2 is
connected to the major rings through Eth 0/0/4 of UPE B and Eth 0/0/4 of UPE C. UPE B is an
edge node, and UPE is an assistant edge node.
VLANs 100 to 300 are configured on CE. Domain 1 and domain 2 share the traffic of packets
from VLANs 100 to 300. Packets from VLANs 100 to 200 are transmitted through domain 1,
and packets from VLANs 201 to 300 are transmitted through domain 2.
Issue 01 (2011-10-26)
Configuration file of PE-AGG
Figure
3-9, UPE A, UPE B, UPE C, UPE D, and PE-AGG form two multi-instance
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
109
Advertisement
Table of Contents
