Huawei Quidway S3700 Series Configuration Manual page 151
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[UPED] rrpp domain 3
[UPED-rrpp-domain-region3] protected-vlan reference-instance 1 2 3
[UPED-rrpp-domain-region3] control-vlan 20
[UPED-rrpp-domain-region3] quit
l Configure UPE E.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEE] rrpp domain 3
[UPEE-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEE-rrpp-domain-region3] control-vlan 20
[UPEE-rrpp-domain-region3] quit
l Configure UPE F.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEF] rrpp domain 3
[UPEF-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEF-rrpp-domain-region3] control-vlan 20
[UPEF-rrpp-domain-region3] quit
l Configure UPE G.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEG] rrpp domain 3
[UPEG-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEG-rrpp-domain-region3] control-vlan 20
[UPEG-rrpp-domain-region3] quit
Step 4 Create RRPP rings.
l Configure UPE A.
# Configure UPE A as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE A.
[UPEA] rrpp domain 1
[UPEA-rrpp-domain-region1] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEA-rrpp-domain-region1] ring 1 enable
[UPEA-rrpp-domain-region1] quit
# Configure UPE A as a transit node of ring 1 in domain 2 and specify primary and secondary
ports on UPE A.
[UPEA] rrpp domain 2
[UPEA-rrpp-domain-region2] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEA-rrpp-domain-region2] ring 1 enable
[UPEA-rrpp-domain-region2] quit
l # Configure UPE B.
# Configure UPE B as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE B.
[UPEB] rrpp domain 1
[UPEB-rrpp-domain-region1] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEB-rrpp-domain-region1] ring 1 enable
[UPEB-rrpp-domain-region1] quit
# Configure UPE B as a transit node of ring 1 in domain 2 and specify primary and secondary
ports on UPE B.
[UPEB] rrpp domain 2
[UPEB-rrpp-domain-region2] ring 1 node-mode transit primary-port ethernet 0/0/1
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
139
Advertisement
Table of Contents
