Huawei Quidway S3700 Series Configuration Manual page 149
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[UPED-Ethernet0/0/3] quit
[UPED] interface ethernet 0/0/2
[UPED-Ethernet0/0/2] port link-type trunk
[UPED-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPED-Ethernet0/0/2] stp disable
[UPED-Ethernet0/0/2] quit
[UPED] interface ethernet 0/0/4
[UPED-Ethernet0/0/4] port link-type trunk
[UPED-Ethernet0/0/4] port trunk allow-pass vlan 100 to 300
[UPED-Ethernet0/0/4] stp disable
[UPED-Ethernet0/0/4] quit
l Configure UPE E.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE E. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEE] interface ethernet 0/0/1
[UPEE-Ethernet0/0/1] port link-type trunk
[UPEE-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEE-Ethernet0/0/1] stp disable
[UPEE-Ethernet0/0/1] quit
[UPEE] interface ethernet 0/0/2
[UPEE-Ethernet0/0/2] port link-type trunk
[UPEE-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEE-Ethernet0/0/2] stp disable
[UPEE-Ethernet0/0/2] quit
l Configure UPE F.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE F. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEF] interface ethernet 0/0/1
[UPEF-Ethernet0/0/1] port link-type trunk
[UPEF-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEF-Ethernet0/0/1] stp disable
[UPEF-Ethernet0/0/1] quit
[UPEF] interface ethernet 0/0/2
[UPEF-Ethernet0/0/2] port link-type trunk
[UPEF-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEF-Ethernet0/0/2] stp disable
[UPEF-Ethernet0/0/2] quit
l Configure UPE G.
# Disable the STP function on the interfaces to be added to the RRPP ring on UPE G. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEG] interface ethernet 0/0/1
[UPEG-Ethernet0/0/1] port link-type trunk
[UPEG-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEG-Ethernet0/0/1] stp disable
[UPEG-Ethernet0/0/1] quit
[UPEG] interface ethernet 0/0/2
[UPEG-Ethernet0/0/2] port link-type trunk
[UPEG-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEG-Ethernet0/0/2] stp disable
[UPEG-Ethernet0/0/2] quit
Step 3 Create RRPP domains and configure the protected VLANs and control VLANs.
l Configure UPE A.
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[UPEA] rrpp domain 1
[UPEA-rrpp-domain-region1] protected-vlan reference-instance 1
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
137
Advertisement
Table of Contents
