Enabling Bfd Globally; Configuring A Static Bfd Session With Automatically Negotiated Discriminators - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
No.
1
2

6.5.2 Enabling BFD Globally

You can perform related BFD configurations only after enabling BFD globally.
Context
Do as follows on the switch on which a static BFD session with automatically negotiated
discriminators is used to detect faults in a link:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bfd
BFD is enabled globally and the BFD view is displayed.
----End
6.5.3 Configuring a Static BFD Session with Automatically
Negotiated Discriminators
Context
Do as follows on the Switch where the static BFD session with automatically negotiated
discriminators is used to detect the link.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bfd cfg-name bind peer-ip ip-address [ vpn-instance vpn-name ] [ interface
interface-type interface-number] source-ip ip-address auto
A BFD session with different parameters is created according to the detected link type.
When creating a BFD session, you must:
Issue 01 (2011-10-26)
Data
Name of a BFD session
IP addresses of local and remote ends of a link checked by BFD, and name and
number of the local interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 BFD Configuration
294