Huawei Quidway S3700 Series Configuration Manual page 148

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Instance
Step 2 Configure RRPP interfaces.
l Configure UPE A.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE A. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEA] interface ethernet 0/0/1
[UPEA-Ethernet0/0/1] port link-type trunk
[UPEA-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/1] stp disable
[UPEA-Ethernet0/0/1] quit
[UPEA] interface ethernet 0/0/2
[UPEA-Ethernet0/0/2] port link-type trunk
[UPEA-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/2] stp disable
[UPEA-Ethernet0/0/2] quit
l # Configure UPE B.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE B. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEB] interface ethernet 0/0/1
[UPEB-Ethernet0/0/1] port link-type trunk
[UPEB-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/1] stp disable
[UPEB-Ethernet0/0/1] quit
[UPEB] interface ethernet 0/0/2
[UPEB-Ethernet0/0/2] port link-type trunk
[UPEB-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/2] stp disable
[UPEB-Ethernet0/0/2] quit
l Configure UPE C.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE C. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEC] interface ethernet 0/0/1
[UPEC-Ethernet0/0/1] port link-type trunk
[UPEC-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/1] stp disable
[UPEC-Ethernet0/0/1] quit
[UPEC] interface ethernet 0/0/2
[UPEC-Ethernet0/0/2] port link-type trunk
[UPEC-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/2] stp disable
[UPEC-Ethernet0/0/2] quit
l Configure UPE D.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE D. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPED] interface ethernet 0/0/1
[UPED-Ethernet0/0/1] port link-type trunk
[UPED-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPED-Ethernet0/0/1] stp disable
[UPED-Ethernet0/0/1] quit
[UPED] interface ethernet 0/0/3
[UPED-Ethernet0/0/3] port link-type trunk
[UPED-Ethernet0/0/3] port trunk allow-pass vlan 100 to 300
[UPED-Ethernet0/0/3] stp disable
Issue 01 (2011-10-26)
Vlans Mapped
0 1 to 4, 7 to 9, 12 to 99, 301 to 4094
1 5 to 6, 100 to 200
2 10 to 11, 201 to 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
136