Maintaining Rrpp; Clearing Rrpp Running Information; Debugging Rrpp - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
-------------------------------------------------------------------------------
Send
Rcv
Secondary port: GigabitEthernet0/0/2
Packet
Direct
-------------------------------------------------------------------------------
Send
Rcv

3.5 Maintaining RRPP

Commands of clearing statistics helps to locate the RRPP faults on a device.

3.5.1 Clearing RRPP Running Information

You can run the reset command to reset the RRPP statistics before recollecting RRPP statistics.
Context
RRPP statistics cannot be restored once cleared. Therefore, confirm the action before you use
the command.
To clear the RRPP statistics, run the following reset command in the user view:
Procedure
Step 1 Run the reset rrpp statistics domain domain-id [ ring ring-id ] command to clear the statistics
of RRPP.
----End

3.5.2 Debugging RRPP

Debugging information facilitates fault location. RRPP debugging includes event debugging
and packet debugging.
Context
Debugging affects the performance of the system. Therefore, after debugging, run the undo
debugging all command to disable it immediately.
Issue 01 (2011-10-26)
2934 0
0 1
LINK
HEALTH DOWN
0 0 1
2928 1 0
CAUTION
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 1 0
0 0 0
COMMON COMPLETE EDGE
FDB FDB HELLO
0 0
0 0
3 RRPP Configuration
0 2936
0 1
MAJOR Packet
FAULT Total
0 1
0 2929
73