Huawei Quidway S3700 Series Configuration Manual page 290

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure VLANs.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 2
[SwitchA-vlan2] quit
[SwitchA] interface ethernet 0/0/1
[SwitchA-Ethernet0/0/1] port link-type trunk
[SwitchA-Ethernet0/0/1] port trunk allow-pass vlan 2
[SwitchA-Ethernet0/0/1] quit
# Configure Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] vlan 2
[SwitchB-vlan2] quit
[SwitchB-Ethernet0/0/1] port link-type trunk
[SwitchB-Ethernet0/0/1] port trunk allow-pass vlan 2
[SwitchB-Ethernet0/0/1] quit
# Configure Switch C.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] vlan 2
[SwitchC-vlan2] quit
[SwitchC] interface ethernet 0/0/1
[SwitchC-Ethernet0/0/1] port link-type trunk
[SwitchC-Ethernet0/0/1] port trunk allow-pass vlan 2
[SwitchC-Ethernet0/0/1] quit
[SwitchC] interface ethernet 0/0/2
[SwitchC-Ethernet0/0/2] port link-type trunk
[SwitchC-Ethernet0/0/2] port trunk allow-pass vlan 2
[SwitchC-Ethernet0/0/2] quit
# Configure Switch D.
<Quidway> system-view
[Quidway] sysname SwitchD
[SwitchD] vlan 2
[SwitchD-vlan2] quit
[SwitchD] interface ethernet 0/0/2
[SwitchD-Ethernet0/0/1] port link-type trunk
[SwitchD-Ethernet0/0/1] port trunk allow-pass vlan 2
[SwitchD-Ethernet0/0/1] quit
[SwitchD] interface ethernet 0/0/2
[SwitchD-Ethernet0/0/2] port link-type trunk
[SwitchD-Ethernet0/0/2] port trunk allow-pass vlan 2
[SwitchD-Ethernet0/0/2] quit
Issue 01 (2011-10-26)
Enable the two-way frame delay measurement for the VLANs on Switch A and Switch B.
VLAN ID
Alarm threshold of the two-way frame delay measurement
Names of the MD and MA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 ITU-T Recommendation Y.1731 Configuration
278