Huawei Quidway S3700 Series Configuration Manual page 197

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Example
# In IEEE 802.1ag Draft 7, if an MD is created successfully, you can view the MD and the level
of the MD after running the display cfm md command.
<Quidway> display cfm md
The total number of MDs is : 1
MD-Name
--------------------------------------------------
md1
In IEEE Standard 802.1ag-2007, if an MD is created successfully, you can view the MD and the
level of the MD after running the display cfm md command.
<Quidway> display cfm md md1
MD Name
MD Name Format
Level
MIP Create-type
SenderID TLV-type
MA list
In IEEE 802.1ag Draft 7, if an MA is created successfully, you can view information about the
MA after running the display cfm ma command.
<Quidway> display cfm ma
The total number of MAs is : 1
--------------------------------------------------
MD Name
Level
MA Name
Interval
Priority
Vlan ID
VSI Name
MEP Number
RMEP Number
In IEEE 802.1ag Draft 7, if a MEP is created successfully, you can view information about the
MEP after running the display cfm mep command.
<Quidway> display cfm mep
The total number of MEPs is : 2
--------------------------------------------------
MD Name
Level
MA Name
MEP ID
Vlan ID
VSI Name
Interface Name
CCM Send
Direction
# In IEEE Standard 802.1ag-2007, display information about the MEP with the ID being 10 in
ma1 of md1.
<Quidway> display cfm mep md md1 ma ma1 mep-id 10
MD Name
MD Name Format
Issue 01 (2011-10-26)
: md1
: md-name
: 0
: none
: defer
:
MA Name : ma1
Interval : 1000
Vlan ID : 10
VSI Name : --
MA Name : ma
Interval : 1000
Vlan ID : --
VSI Name : --
: md1
: 0
: ma1
: 1000
: 6
: --
: --
: 0
: 0
: md2
: 7
: ma3
: 40
: 10
: --
: Ethernet0/0/1
: enabled
: outward
: md1
: md-name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
Level
0
185