Huawei Quidway S3700 Series Configuration Manual page 229

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Figure 4-14 Networking diagram for configuring basic functions of Ethernet CFM
VLAN2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Data Preparation
To complete the configuration, you need the following data:
Issue 01 (2011-10-26)
SwitchI
Eth0/0/3
Eth0/0/1
Eth0/0/3
Eth0/0/3
Eth0/0/2
VLAN2
Create VLANs and add interfaces to the VLANs.
Create MD 1 at level 6 on all the Switches.
Create MA 1 in MD 1 on all the Switches except Switch G. Associate MA 1 with VLAN
2.
Create MA 1 in MD 1 on all the Switches except Switch E and Switch I. Associate MA 2
with VLAN 3.
Create MD 2 at level 4 and create MA 3 in MD 2 on Switch A, Switch B, Switch C, and
Switch D. Associate MA 3 with VLAN 4.
Create MEPs and RMEPs in MA 1 of MD 1 on Switch I, Switch H, and Switch E.
Create MEPs and RMEPs in MA 2 of MD 1 on Switch H and Switch G.
Create MEPs and RMEPs in MA 3 of MD 2 on Switch A, Switch C, and Switch D.
Enable sending and receiving of CCMs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchA
Eth0/0/1
Eth0/0/2
MD2
Eth0/0/2
Eth0/0/3
SwitchD
SwitchH
Eth0/0/1
VLAN3
4 Ethernet OAM Configuration
VLAN2
Eth0/0/1
SwitchE
Eth0/0/3
SwitchB
SwitchF
Eth0/0/3
Eth0/0/2
Eth0/0/2
SwitchC
MD1 SwitchG
Eth0/0/3
VLAN3
MD1
MEP in MA1
MEP in MA2
Eth0/0/3
MD2
MEP in MA3
217