Huawei Quidway S3700 Series Configuration Manual page 103

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[SwitchA-rrpp-domain-region2] protected-vlan reference-instance 2
[SwitchA-rrpp-domain-region2] quit
# Configure domain 2 on Switch B, which is the transit node of ring 2. Configure VLAN 20 as
the main control VLAN of domain 2, and configure the list of protected VLANs of instance 2.
[SwitchB] rrpp domain 2
[SwitchB-rrpp-domain-region2] control-vlan 20
[SwitchB-rrpp-domain-region2] protected-vlan reference-instance 2
[SwitchB-rrpp-domain-region2] quit
# Configure domain 2 on Switch C, which is the transit node of ring 2. Configure VLAN 20 as
the main control VLAN of domain 2, and configure the list of protected VLANs of instance 2.
[SwitchC] rrpp domain 2
[SwitchC-rrpp-domain-region2] control-vlan 20
[SwitchC-rrpp-domain-region2] protected-vlan reference-instance 2
[SwitchC-rrpp-domain-region2] quit
Step 3 Set the timers of the RRPP domains
# Set the Hold timer and Fail timer for Switch E, the master node on ring 1.
[SwitchE] rrpp domain 1
[SwitchE-rrpp-domain-region1] timer hello-timer 2 fail-timer 7
[SwitchE-rrpp-domain-region1] quit
# Set the Hold timer and Fail timer for Switch D, the transit node on ring 1.
[SwitchD] rrpp domain 1
[SwitchD-rrpp-domain-region1] timer hello-timer 2 fail-timer 7
[SwitchD-rrpp-domain-region1] quit
# Set the Hold timer and Fail timer for Switch C, the transit node on ring 1.
[SwitchC] rrpp domain 1
[SwitchC-rrpp-domain-region1] timer hello-timer 2 fail-timer 7
[SwitchC-rrpp-domain-region1] quit
# Set the Hold timer and Fail timer for Switch A, the master node on ring 2.
[SwitchA] rrpp domain 2
[SwitchA-rrpp-domain-region2] timer hello-timer 3 fail-timer 10
[SwitchA-rrpp-domain-region2] quit
# Set the Hold timer and Fail timer for Switch B, the transit node on ring 2.
[SwitchB] rrpp domain 2
[SwitchB-rrpp-domain-region2] timer hello-timer 3 fail-timer 10
[SwitchB-rrpp-domain-region2] quit
# Set the Hold timer and Fail timer for Switch C, the transit node on ring 2.
[SwitchC] rrpp domain 2
[SwitchC-rrpp-domain-region2] timer hello-timer 3 fail-timer 10
[SwitchC-rrpp-domain-region2] quit
Step 4 Disable STP on the interfaces to be added to the RRPP rings.
# Disable STP on the interfaces to be added to the RRPP ring on Switch A.
[SwitchA] interface ethernet 0/0/1
[SwitchA-Ethernet0/0/1] stp disable
[SwitchA-Ethernet0/0/1] quit
[SwitchA] interface ethernet 0/0/2
Issue 01 (2011-10-26)
NOTE
You can set two timers for the tangent point because the two tangent rings reside in different domains.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
91