Huawei Quidway S3700 Series Configuration Manual page 230

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l
l
Procedure
Step 1 Create VLANs and add interfaces to the VLANs. The configuration procedure is not mentioned
here.
Step 2 Create MD 1.
# Create MD 1 on Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] cfm enable
[SwitchA] cfm md md1 level 6
# Create MD 1 on Switchs B to I.
The configurations of these Switches are similar to the configuration of Switch A, and are not
mentioned here.
Step 3 Create MA 1 in MD 1 on all the Switches except Switch G.
# Create MA 1 in MD 1 on Switch A.
[SwitchA-md-md1] ma ma1
[SwitchA-md-md1-ma-ma1] map vlan 2
[SwitchA-md-md1-ma-ma1] quit
# Create MA 1 in MD 1 on Switches B to I.
The configurations of these Switches are similar to the configuration of Switch A, and are not
mentioned here.
Step 4 Create MA 2 in MD 1 on all the Switches except Switch E and Switch I.
# Create MA 2 in MD 1 on Switch A.
[SwitchA-md-md1] ma ma2
[SwitchA-md-md1-ma-ma2] map vlan 3
[SwitchA-md-md1-ma-ma2] quit
[SwitchA-md-md1] quit
# Create MA 2 in MD 1 on Switches B to H.
The configurations of these Switches are similar to the configuration of Switch A, and are not
mentioned here.
Step 5 Create MD 2 and create MA 3 in MD 2 on Switch A, Switch B, Switch C, and Switch D.
# Create MD 2 and create MA 3 in MD 2 on Switch A.
[SwitchA] cfm md md2 level 4
[SwitchA-md-md2] ma ma3
[SwitchA-md-md2-ma-ma3] map vlan 4
[SwitchA-md-md2-ma-ma3] quit
[SwitchA-md-md2] quit
Create MD 2 and create MA 3 in MD 2 on Switch A, Switch B, Switch C, and Switch D.
The configurations of these Switches are similar to the configuration of Switch A, and are not
mentioned here.
Issue 01 (2011-10-26)
Level of MD 1: 6
Level of MD 2: 4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
218