Huawei Quidway S3700 Series Configuration Manual page 51

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Step 7 Enable Smart Link on Switch A.
[SwitchA-smlk-group1] smart-link enable
[SwitchA-smlk-group1] quit
Step 8 Enable the receiving of Flush packets.
# Configure Switch B.
<SwitchB> system-view
[SwitchB] interface ethernet 0/0/1
[SwitchB-Ethernet0/0/1] smart-link flush receive control-vlan 10 password simple
123
[SwitchB-Ethernet0/0/1] quit
# Configure Switch C.
<SwitchC> system-view
[SwitchC] interface ethernet 0/0/1
[SwitchC-Ethernet0/0/1] smart-link flush receive control-vlan 10 password simple
123
[SwitchC-Ethernet0/0/1] quit
Step 9 Verify the configuration.
# Run the display smart-link group command to view information about the Smart Link group
on Switch A. If the following information is displayed, it indicates that the configuration is
successful.
l The Smart Link function is enabled.
l The control VLAN ID is 10.
l Eth 0/0/1 is the master interface and is in Active state, and Eth 0/0/2 is the slave interface
[SwitchA] display smart-link group 1
Smart Link group 1 information :
Smart Link group was enabled
Wtr-time is: 30 sec.
Load-Balance Instance: 10
There is no protected-vlan reference-instance
DeviceID: 0025-9e80-2494 Control-vlan ID:
10
----------------------------------------------------------------------
Ethernet0/0/1
:00
Ethernet0/0/2
:00
# Run the shutdown command to shut down Eth 0/0/1, and you can find that Eth 0/0/1 is in
Inactive state and Eth 0/0/2 is in Active state.
[SwitchA] interface ethernet 0/0/1
[SwitchA-Ethernet0/0/1] shutdown
[SwitchA-Ethernet0/0/1] display smart-link group 1
Smart Link group 1 information :
Smart Link group was enabled
Wtr-time is: 30 sec.
Load-Balance Instance: 10
There is no protected-vlan reference-instance
DeviceID: 0025-9e80-2494 Control-vlan ID:
10
----------------------------------------------------------------------
Ethernet0/0/1
:00
Issue 01 (2011-10-26)
and is in Inactive state. The load balancing function is configured.
Member
Member
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Smart Link and Monitor Link Configuration
Role State Flush Count Last-Flush-Time
Master Active 1
Slave Inactive 0
Role State Flush Count Last-Flush-Time
Master Inactive 1
0000/00/00 00:00:00 UTC+00
0000/00/00 00:00:00 UTC+00
0000/00/00 00:00:00 UTC+00
39