Huawei Quidway S3700 Series Configuration Manual page 269

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Re-enable Eth 0/0/1 of UPEB, and you can find that the CFM status on PE-AGG becomes
UP. Run the display rrpp verbose domain 1 command on PE-AGG to check the status of the
RRPP ring and interface, and you can find that the RRPP ring becomes Complete as follows:
[PE-AGG] display rrpp verbose domain 1
Domain Index
Control VLAN
Protected VLAN: Reference Instance 1
ello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port: Ethernet0/0/2
----End
Configuration Files
l
#
sysname UPEA
#
vlan batch 5 to 6 100 to 300
#
rrpp enable
#
cfm enable
#
stp region-configuration
instance 1 vlan 5 6 100 to 300
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode transit primary-port Ethernet 0/0/1 secondary-port Ethernet 0/0/2
level 0
ring 1 enable
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 5 to 6
stp disable
#
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6
stp disable
#
cfm md md1
ma ma1
ma ma2
#
oam-mgr
Issue 01 (2011-10-26)
: 1
: major 5
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: Ethernet0/0/1
Configuration file of UPEA
map vlan 100
mep mep-id 1 interface Ethernet0/0/2 outward
mep ccm-send mep-id 1 enable
remote-mep mep-id 2
remote-mep ccm-receive mep-id 2 enable
map vlan 100
mep mep-id 3 interface Ethernet0/0/1 outward
mep ccm-send mep-id 3 enable
remote-mep mep-id 4
remote-mep ccm-receive mep-id 4 enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 6
Fail Timer : 3 sec(default is 3 sec)
Is Active : Yes
Port status: UP
Port status: BLOCKED
100 to 300
100 to 300
4 Ethernet OAM Configuration
257