Huawei Quidway S3700 Series Configuration Manual page 249

Hide thumbs Also See for Quidway S3700 Series:
Table of Contents

Advertisement

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[SwitchA] cfm enable
# Create the MD, MA, MEP, and RMEP on Switch A.
[SwitchA]cfm md md1
[SwitchA-md-md1]ma ma1
[SwitchA-md-md1-ma-ma1] map vlan 10
[SwitchA-md-md1-ma-ma1] ccm-interval 1000
[SwitchA-md-md1-ma-ma1] mep mep-id 2 interface ethernet 0/0/2 outward
[SwitchA-md-md1-ma-ma1] remote-mep mep-id 1
[SwitchA-md-md1-ma-ma1] mep ccm-send enable
[SwitchA-md-md1-ma-ma1] remote-mep ccm-receive enable
[SwitchA-md-md1-ma-ma1] quit
[SwitchA-md-md1] quit
# Enable Ethernet CFM globally on Switch B.
[SwitchB] cfm enable
# Create the MD, MA, MEP, and RMEP on Switch B.
[SwitchB]cfm md md1
[SwitchB-md-md1]ma ma1
[SwitchB-md-md1-ma-ma1] map vlan 10
[SwitchB-md-md1-ma-ma1] ccm-interval 1000
[SwitchB-md-md1-ma-ma1] mep mep-id 1 interface ethernet 0/0/1 outward
[SwitchB-md-md1-ma-ma1] remote-mep mep-id 2
[SwitchB-md-md1-ma-ma1] mep ccm-send enable
[SwitchB-md-md1-ma-ma1] remote-mep ccm-receive enable
[SwitchB-md-md1-ma-ma1] quit
[SwitchB-md-md1] quit
# Verify the configuration.
Run the display cfm mep and display cfm remote-mep commands on Switch A or Switch B.
If information about the MEP and RMEP is displayed, it indicates that the configuration is
successful. The displayed information on Switch B is as follows:
[SwitchB]display cfm mep md md1
The total number of MEPs is : 1
--------------------------------------------------
MD Name
Level
MA Name
MEP ID
Vlan ID
VSI Name
Interface Name
CCM Send
Direction
[SwitchB] display cfm remote-mep md md1
The total number of RMEPs is 1
MD Name
Level
MA Name
RMEP ID
Vlan ID
VSI Name
MAC
CCM Receive
Trigger-If-Down
CFM Status
Alarm Status
Step 3 Associate an Ethernet CFM module with an interface.
Associate an Ethernet CFM module with an interface on Switch A.
[SwitchA] oam-mgr
[SwitchA-oam-mgr] oam-bind cfm md md1 ma ma1 trigger if-down interface ethernet
Issue 01 (2011-10-26)
: md1
: 0
: ma1
: 1
: 10
: --
: Ethernet0/0/1
: enabled
: outward
: md1
: 0
: ma1
: 2
: 10
: --
: --
: enabled
: disabled
: up
: RemoteAlarms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
237

Advertisement

Table of Contents
loading

Table of Contents