Example For Configuring Vrrp In Load Balancing Mode - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l

7.11.2 Example for Configuring VRRP in Load Balancing Mode

Networking Requirements
As shown in
l
l
l
Issue 01 (2011-10-26)
#
return
Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 200 300 400
#
interface Vlanif200
ip address 192.168.1.2 255.255.255.0
#
interface Vlanif300
ip address 20.1.1.1 255.255.255.0
#
interface Vlanif400
ip address 192.168.2.2 255.255.255.0
#
interface Ethernet0/0/1
port hybrid pvid vlan 300
port hybrid untagged vlan 300
#
interface Ethernet0/0/2
port hybrid pvid vlan 200
port hybrid untagged vlan 200
#
interface Ethernet0/0/3
port hybrid pvid vlan 400
port hybrid untagged vlan 400
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 192.168.2.0 0.0.0.255
network 20.1.1.0 0.0.0.255
#
return
Figure 7-4,
Switch A is the master device in VRRP group 1 and the backup device in VRRP group 2.
Switch B is the master device in VRRP group 2 and the backup device in VRRP group 1.
Host A on the internal network uses VRRP group 1 as the gateway, and Host C uses VRRP
group 2 as the gateway. The VRRP groups share data flows and back up each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VRRP and VRRP6 Configuration
354