Huawei Quidway S3700 Series Configuration Manual page 102

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[SwitchB] stp region-configuration
[SwitchB-mst-region] instance 2 vlan 20 to 21
[SwitchB-mst-region] active region-configuration
[SwitchB-mst-region] quit
# Configure Switch C.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] stp region-configuration
[SwitchC-mst-region] instance 1 vlan 10 to 11
[SwitchC-mst-region] instance 2 vlan 20 to 21
[SwitchC-mst-region] active region-configuration
[SwitchC-mst-region] quit
# Configure Switch D.
<Quidway> system-view
[Quidway] sysname SwitchD
[SwitchD] stp region-configuration
[SwitchD-mst-region] instance 1 vlan 10 to 11
[SwitchD-mst-region] active region-configuration
[SwitchD-mst-region] quit
# Configure Switch E.
<Quidway> system-view
[Quidway] sysname SwitchE
[SwitchE] stp region-configuration
[SwitchE-mst-region] instance 1 vlan 10 to 11
[SwitchE-mst-region] active region-configuration
[SwitchE-mst-region] quit
Step 2 Create RRPP domains and configure the control VLANs and protected VLANs of the domains.
# Configure domain 1 on Switch E, which is the master node of ring 1. Configure VLAN 10 as
the main control VLAN of domain 1, and configure the list of protected VLANs mapping
instance 1.
[SwitchE] rrpp domain 1
[SwitchE-rrpp-domain-region1] control-vlan 10
[SwitchE-rrpp-domain-region1] protected-vlan reference-instance 1
[SwitchE-rrpp-domain-region1] quit
# Configure domain 1 on Switch C, which is the transit node of ring 1. Configure VLAN 10 as
the main control VLAN of domain 1, and configure the list of protected VLANs mapping
instance 1.
[SwitchC] rrpp domain 1
[SwitchC-rrpp-domain-region1] control-vlan 10
[SwitchC-rrpp-domain-region1] protected-vlan reference-instance 1
[SwitchC-rrpp-domain-region1] quit
# Configure domain 1 on Switch D, which is the transit node of ring 1. Configure VLAN 10 as
the main control VLAN of domain 1, and configure the list of protected VLANs of instance 1.
[SwitchD] rrpp domain 1
[SwitchD-rrpp-domain-region1] control-vlan 10
[SwitchD-rrpp-domain-region1] protected-vlan reference-instance 1
[SwitchD-rrpp-domain-region1] quit
# Configure domain 2 on Switch E, which is the master node of ring 2. Configure VLAN 20 as
the main control VLAN of domain 2, and configure the list of protected VLANs mapping
instance 1.
[SwitchA] rrpp domain 2
[SwitchA-rrpp-domain-region2] control-vlan 20
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
90