Resetting The Dldp Status Of An Interface; Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
When you reset the DLDP status globally, the DLDP status is reset for all the disabled interfaces
on the S3700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dldp reset
The DLDP status is reset globally.
----End

1.3.3 Resetting the DLDP Status of an Interface

Context
If you reset the DLDP status on an interface or interface group, the DLDP status is reset for the
interface or all the disabled interfaces in the interface group.
The dldp reset command takes effect only when DLDP is enabled globally and on interfaces.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The Ethernet interface view is displayed.
Or run:
port-group port-group-name
The interface group view is displayed.
Step 3 Run:
dldp reset
The DLDP status is reset on the interface or interface group.
----End

1.3.4 Checking the Configuration

Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 DLDP Configuration
10