Huawei Quidway S3700 Series Configuration Manual page 98

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Run the display rrpp verbose domain command on Switch D. The following information
----End
Configuration Files
l
Issue 01 (2011-10-26)
GEthernet0/0/2 as the primary interface and Ethernet0/0/1 as the secondary interface. Switch
D is also the assistant edge node of the major ring, with Ethernet0/0/2 as the common interface
and Ethernet0/0/3 as the edge interface.
is displayed:
[SwitchD] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 10
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : Linkup
Is Enabled : Enable
Primary port : Ethernet0/0/2
Secondary port: Ethernet0/0/1
RRPP Ring : 2
Ring Level : 1
Node Mode : Assistant-edge
Ring State : Linkup
Is Enabled : Disable
Common port : Ethernet0/0/2
Edge port : Ethernet0/0/3
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 2 to 11
#
rrpp enable
#
stp region-
configuration
instance 1 vlan 2 to
11
active region-
configuration
#
rrpp domain 1
control-vlan 10
protected-vlan reference-instance 1
ring 1 node-mode transit primary-port Ethernet 0/0/2 secondary-port Ethernet
0/0/1 level 0
ring 1 enable
ring 2 node-mode edge common-port Ethernet 0/0/2 edge-port Ethernet 0/0/3
ring 2 enable
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 2 to 11
stp disable
#
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 11
stp disable
#
interface Ethernet0/0/3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 11
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: UP
Is Active : No
Port status: UP
Port status: UP
3 RRPP Configuration
86