Huawei Quidway S3700 Series Configuration Manual page 87
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Map instance 1 to VLANs 100 to 300.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] stp region-configuration
[SwitchA-mst-region] instance 1 vlan 20 21 100 to 300
[SwitchA-mst-region] active region-configuration
[SwitchA-mst-region] quit
The configurations of Switch B and Switch C are similar to the configuration of Switch A. The
detailed configurations are omitted here.
Step 2 Create an RRPP domain and the control VLAN.
# On the master node of ring 1, namely Switch A, create RRPP domain 1 and configure VLAN
20 as the main control VLAN.
[SwitchA] rrpp domain 1
[SwitchA-rrpp-domain-region1] control-vlan 20
[SwitchA-rrpp-domain-region1] quit
# On the transit node of ring 1, namely Switch B, create RRPP domain 1 and configure VLAN
20 as the main control VLAN.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] rrpp domain 1
[SwitchB-rrpp-domain-region1] control-vlan 20
[SwitchB-rrpp-domain-region1] quit
# On the master node of ring 1, namely SwitchC, create RRPP domain 1 and configure VLAN
20 as the main control VLAN.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] rrpp domain 1
[SwitchC-rrpp-domain-region1] control-vlan 20
[SwitchC-rrpp-domain-region1] quit
Step 3 Configure the interfaces to be added to the RRPP ring as trunk interfaces, allow VLANs 100 to
300 on the interfaces, and disable STP on the interfaces.
# Configure Switch A.
[SwitchA] interface ethernet 0/0/1
[SwitchA-Ethernet0/0/1] port link-type trunk
[SwitchA-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[SwitchA-Ethernet0/0/1] stp disable
[SwitchA-Ethernet0/0/1] quit
[SwitchA] interface ethernet 0/0/2
[SwitchA-Ethernet0/0/2] port link-type trunk
[SwitchA-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[SwitchA-Ethernet0/0/2] stp disable
[SwitchA-Ethernet0/0/2] quit
# Configure Switch B.
Issue 01 (2011-10-26)
Numbers of the RRPP interfaces
Control VLAN ID of ring 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
75
Advertisement
Table of Contents
