Huawei Quidway S3700 Series Configuration Manual page 112

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPEB-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPEB-mst-region] active region-configuration
[UPEB-mst-region] quit
l Configure UPE C.
# Create data VLANs 100 to 300 on UPE C.
<Quidway> system-view
[Quidway] sysname UPEC
[UPEC] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs 100
to 200 in domain 1.
[UPEC] stp region-configuration
[UPEC-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPEC-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPEC-mst-region] active region-configuration
[UPEC-mst-region] quit
l Configure PE-AGG.
# Create data VLANs 100 to 300 on PE-AGG.
<Quidway> system-view
[Quidway] sysname PE-AGG
[PE-AGG] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs 100
to 200 in domain 1.
[PE-AGG] stp region-configuration
[PE-AGG-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[PE-AGG-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[PE-AGG-mst-region] active region-configuration
[PE-AGG-mst-region] quit
l Verify the configuration.
Run the display stp region-configuration command on the devices to view the mapping
between instances and VLANs. The displayed information on UPE A is as follows:
[UPEA] display stp region-configuration
Oper configuration
Issue 01 (2011-10-26)
Format selector :0
Region name :00e0cd568d00
Revision level :0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
100