Configuring Remote Mac Swap Loopback; Establishing The Configuration Task - Huawei Quidway S3700 Series Configuration Manual

Hide thumbs Also See for Quidway S3700 Series:
Table of Contents

Advertisement

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Loopback state
Loopback test time(s)
Loopback interface
Loopback output interface : Ethernet0/0/2
Loopback source MAC
Loopback destination MAC
Loopback vlan
Loopback inner vlan
Loopback packets
Drop packets

9.4 Configuring Remote MAC Swap Loopback

By configuring remote MAC swap loopback, you can test connectivity and performance of the
Ethernet network connected to a switch.

9.4.1 Establishing the Configuration Task

Before configuring remote MAC swap loopback, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This can help you complete the configuration task quickly and accurately.
Applicable Environment
Before using an S3700 to provide services for users, perform a remote MAC swap loopback test
to check whether the S3700 can provide services properly. This test checks connectivity and
performance of the network between an S3700 uplink interface and a remote device. The remote
MAC swap loopback test can also check whether VLAN mapping and VLAN stacking are
configured successfully on the uplink interface.
A remote MAC swap loopback test checks connectivity and performance of the network between
a tester and a tested switch but does not check performance of the tested switch.
Pre-configuration Tasks
Before configuring remote MAC swap loopback, complete the following task:
l
l
Data Preparation
To configure remote MAC swap loopback, you need the following data.
No.
1
2
3
4
Issue 01 (2011-10-26)
Creating a VLAN and adding the interface where you want to perform the remote MAC
swap loopback test to the VLAN
Configuring VLAN mapping or VLAN stacking as required.
Data
Type and number of the interface where the remote MAC swap loopback test needs
to be performed
ID of the VLAN that the interface belongs to
(Optional) Inner VLAN ID
Timeout time of the loopback test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: running
: 60
: Ethernet0/0/1
: 0001-0001-0001
: 0002-0002-0002
: 10
: 0
: 0
: 3
9 MAC Swap Loopback Configuration
379

Advertisement

Table of Contents
loading

Table of Contents