Creating A Monitor Link Group; Configuring The Uplink And Downlink Interfaces In A Monitor Link Group - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
No.
1
2
3
4

2.4.2 Creating a Monitor Link Group

Context
Do as follows on SwitchA and SwitchB.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
monitor-link group group-id
A Monitor Link group is created and the Monitor Link group view is displayed.
----End
2.4.3 Configuring the Uplink and Downlink Interfaces in a Monitor
Link Group
Context
Do as follows on SwitchA and SwitchB.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
monitor-link group group-id
The Monitor Link group view is displayed. The S3700 supports a maximum of 16 Monitor Link
groups.
Step 3 Run:
port interface-type interface-number { downlink [ downlink-id ] | uplink }
Issue 01 (2011-10-26)
Data
ID of the Monitor Link group
Number of each interface added to the Monitor Link group
Revertive switching interval of the Monitor Link group
ID of the Smart Link group
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Smart Link and Monitor Link Configuration
30