Huawei Quidway S3700 Series Configuration Manual page 145

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
7.
8.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create instances.
l Configure UPE A.
# Create data VLANs 100 to 300 on UPE A.
<Quidway> system-view
[Quidway] sysname UPEA
[UPEA] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs 100
to 200 in domain 1.
[UPEA] stp region-configuration
[UPEA-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPEA-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPEA-mst-region] active region-configuration
[UPEA-mst-region] quit
l # Configure UPE B.
# Create data VLANs 100 to 300 on UPE B.
Issue 01 (2011-10-26)
Map instance 1 to VLANs 100 to 200. Map instance 2 to VLANs 201 to 300.
Add UPE A, UPE B, UPE C, and UPE D to ring 1 in domain 1 and ring 1 in domain 2.
Add UPE D, UPE E, UPE F, and UPE G to ring 1 in domain 3.
Configure protected VLANs in domain 1 and domain 2.
Configure control VLANs in domain 1 and domain 2.
Configure the control VLAN in domain 3.
Configure UPE D as the master node and configure UPE A, UPE B, and UPE C as transit
nodes on ring 1 in domain 1 and ring 1 in domain 2.
Configure UPE F as the master node and configure UPE D, UPE E, and UPE G as transit
nodes on ring 1 in domain 3.
Instance IDs
Range of the protected VLANs
IDs of the control VLANs
Numbers of the RRPP interfaces
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
133