Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
The functions of the Smart Link group are enabled.
----End

2.2.10 Checking the Configuration

Procedure
l
l
----End
Example
Run the display smart-link group { all | group-id } command to check information about a
Smart Link group. The following information is displayed:
<Quidway> display smart-link group 1
Smart Link group 1 information :
Smart Link group was enabled
Wtr-time is: 30 sec.
Load-Balance Instance: 1 to 2
------------------------------------------------------------------------
GigabitEthernet0/0/1
+05:00
GigabitEthernet0/0/2
+05:00
If the configuration is correct, the following information is displayed:
l
l
l
Run the display smart-link flush command, and you can view information about received Flush
packets.
<Quidway> display smart-link flush
Receive flush packets count:
Receive last flush interface:
Receive last flush packet time:
2009/02/23
Receive last flush packet source mac:
Receive last flush packet control vlan ID:
Issue 01 (2011-10-26)
Run the display smart-link group { all | group-id } command to check information about
a Smart Link group.
Run the display smart-link flush command to check information about the received Flush
packets.
There is no protected-vlan reference-instance
DeviceID: 0018-2000-0083
Member Role
Master
Slave
The functions of the Smart Link group are enabled. Therefore, "Smart link group was
enabled" is displayed.
The status of the interfaces in the Smart Link group is displayed, including the role of each
interface in the group, number of sent Flush packets, and time when the last Flush packets
are sent. As shown in the preceding information, Eth 0/0/1 is the master interface in the
Smart Link group; this interface is in the Forwarding state; it sent a Flush packet at 16:37
on 2008-11-21.
The control VLAN ID contained in the sent Flush packets is 20.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Smart Link and Monitor Link Configuration
Control-vlan ID: 20
State Flush Count
Active 1
Inactive 2
1191
Ethernet0/0/1
16:48:53 UTC+05:00
0018-0202-0088
20
Last-Flush-Time
2008/11/21 16:37:20 UTC
2008/11/21 17:45:20 UTC
24