Huawei Quidway S3700 Series Configuration Manual page 262
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure PE-AGG.
l Verify the configuration.
Step 2 Configure the interfaces to be added to the RRPP ring.
l Configure UPEA.
l Configure UPEB.
Issue 01 (2011-10-26)
# Create instance 1, and map control VLANs 5 and 6 and data VLANs 100 to 300 in domain
1 to instance 1.
[UPEC] stp region-configuration
[UPEC-mst-region] instance 1 vlan 5 6 100 to 300
# Activate the configuration.
[UPEC-mst-region] active region-configuration
[UPEC-mst-region] quit
# Create data VLANs 100 to 300 on PE-AGG.
<Quidway> system-view
[Quidway] sysname PE-AGG
[PE-AGG] vlan batch 100 to 300
# Create instance 1, and map control VLANs 5 and 6 and data VLANs 100 to 200 in domain
1 to instance 1.
[PE-AGG] stp region-configuration
[PE-AGG-mst-region] instance 1 vlan 5 6 100 to 300
# Activate the configuration.
[PE-AGG-mst-region] active region-configuration
[PE-AGG-mst-region] quit
After the preceding configuration, run the following command to view the mapping between
instances and VLANs. Take the display on UPEA as an example:
[UPEA] display stp region-configuration
Oper configuration
Format selector
Region name
Revision level
Instance
Vlans Mapped
0
1 to 4, 7 to 9, 12 to 99, 301 to 4094
1
5 to 6, 100 to 300
# On UPEA, disable STP on the interfaces to be added to the RRPP ring. Configure the RRPP
interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEA] interface ethernet 0/0/1
[UPEA-Ethernet0/0/1] port link-type trunk
[UPEA-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/1] stp disable
[UPEA-Ethernet0/0/1] quit
[UPEA] interface ethernet 0/0/2
[UPEA-Ethernet0/0/2] port link-type trunk
[UPEA-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/2] stp disable
[UPEA-Ethernet0/0/2] quit
# On UPEB, disable STP on the interfaces to be added to the RRPP ring. Configure the RRPP
interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEB] interface ethernet 0/0/1
[UPEB-Ethernet0/0/1] port link-type trunk
[UPEB-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/1] stp disable
[UPEB-Ethernet0/0/1] quit
[UPEB] interface ethernet 0/0/2
[UPEB-Ethernet0/0/2] port link-type trunk
[UPEB-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
:0
:001820000083
:0
4 Ethernet OAM Configuration
250
Advertisement
Table of Contents
