Huawei Quidway S3700 Series Configuration Manual page 118

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Run the display rrpp verbose domain command on UPE A. You can obtain the following
# View detailed information about UPE A in domain 1.
[UPEA] display rrpp verbose domain 1
Domain Index
Control VLAN
Protected VLAN: Reference Instance 1
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port: Ethernet0/0/2
The preceding information shows that VLAN 5 is the control VLAN in domain 1 and VLANs
mapping instance 1 are the protected VLANs. UPE A is a transit node in domain 1 and is in
LinkUp state.
# View detailed information about UPE A in domain 2.
[UPEA] display rrpp verbose domain 2
Domain Index
Control VLAN
Protected VLAN: Reference Instance 2
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port: Ethernet0/0/2
The preceding information shows that VLAN 10 is the control VLAN in domain 2, and VLANs
mapping instance 2 are the protected VLANs. UPE A is a transit node in domain 2 and is in
LinkUp state.
l Run the display rrpp verbose domain command on PE-AGG. You can obtain the following
# View detailed information about PE-AGG in domain 1.
[PE-AGG] display rrpp verbose domain 1
Domain Index
Control VLAN
Protected VLAN: Reference Instance 1
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port: Ethernet0/0/2
The preceding information shows that VLAN 5 is the control VLAN in domain 1 and VLANs
mapping instance 1 are the protected VLANs.
PE-AGG is the master node in domain 1 and is in Complete state.
Issue 01 (2011-10-26)
results:
: 1
: major 5
: 1 sec(default is 1 sec)
: 1
: 0
: Transit
: LinkUp
: Enable
: Ethernet0/0/1
: 2
: major 10
: 1 sec(default is 1 sec)
: 1
: 0
: Transit
: LinkUp
: Enable
: Ethernet0/0/1
results:
: 1
: major 5
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: Ethernet0/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 6
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: UP
sub 11
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: UP
sub 6
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: BLOCKED
3 RRPP Configuration
106