Huawei Quidway S3700 Series Configuration Manual page 128
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure CE2.
l Configure UPE A.
l # Configure UPE B.
l Configure UPE C.
Issue 01 (2011-10-26)
[CE1-Ethernet0/0/2] stp disable
[CE1-Ethernet0/0/2] quit
# Disable STP on the interfaces that need to be added to the RRPP ring on CE2. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[CE2] interface ethernet 0/0/1
[CE2-Ethernet0/0/1] port link-type trunk
[CE2-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[CE2-Ethernet0/0/1] stp disable
[CE2-Ethernet0/0/1] quit
[CE2] interface ethernet 0/0/2
[CE2-Ethernet0/0/2] port link-type trunk
[CE2-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[CE2-Ethernet0/0/2] stp disable
[CE2-Ethernet0/0/2] quit
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE A. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEA] interface ethernet 0/0/1
[UPEA-Ethernet0/0/1] port link-type trunk
[UPEA-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/1] stp disable
[UPEA-Ethernet0/0/1] quit
[UPEA] interface ethernet 0/0/2
[UPEA-Ethernet0/0/2] port link-type trunk
[UPEA-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/2] stp disable
[UPEA-Ethernet0/0/2] quit
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE B. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEB] interface ethernet 0/0/1
[UPEB-Ethernet0/0/1] port link-type trunk
[UPEB-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/1] stp disable
[UPEB-Ethernet0/0/1] quit
[UPEB] interface ethernet 0/0/2
[UPEB-Ethernet0/0/2] port link-type trunk
[UPEB-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/2] stp disable
[UPEB-Ethernet0/0/2] quit
[UPEB] interface ethernet 0/0/3
[UPEB-Ethernet0/0/3] port link-type trunk
[UPEB-Ethernet0/0/3] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/3] stp disable
[UPEB-Ethernet0/0/3] quit
[UPEB] interface ethernet 0/0/4
[UPEB-Ethernet0/0/4] port link-type trunk
[UPEB-Ethernet0/0/4] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/4] stp disable
[UPEB-Ethernet0/0/4] quit
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE C. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEC] interface ethernet 0/0/1
[UPEC-Ethernet0/0/1] port link-type trunk
[UPEC-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/1] stp disable
[UPEC-Ethernet0/0/1] quit
[UPEC] interface ethernet 0/0/2
[UPEC-Ethernet0/0/2] port link-type trunk
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
116
Advertisement
Table of Contents
