Optional) Creating A Vlan; Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability

4.8.11 (Optional) Creating a VLAN

Through the association between a VLAN and default MDs, all interfaces of the specified VLAN
can generate MIPs based on default MDs.
Context
Do as follows on each device:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cfm default md [ level level ]
The default MD is created and the default MD view is displayed.
Step 3 Run:
vlan { vlan-id1 [ to vlan-id2 ] }&<1-10>
The specified VLAN is created.
----End

4.8.12 Checking the Configuration

Prerequisite
The configurations of basic functions of Ethernet CFM are complete.
Procedure
l
l
l
l
l
l
----End
Issue 01 (2011-10-26)
Run the display cfm md [ md-name ] command to check the configuration of an MD.
Run the display cfm ma [ md md-name [ ma ma-name ] ] command to check detailed
information about an MA.
Run the display cfm mep [ md md-name [ ma ma-name [ mep-id mep-id ] ] ] command
to check detailed information about a MEP.
Run the display cfm remote-mep md md-name ma ma-name [ mep-id mep-id ] or display
cfm remote-mep [ md md-name [ ma ma-name ] ] [ cfm-state { up | down | disable } ]
command to check detailed information about an RMEP.
Run the display mip create-type [ interface interface-type interface-number ] command
to check the MIP creation rule.
Run the display cfm mip [ interface interface-type interface-number | level level ]
command to check information about a MIP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
184